Connect your Car with the Veepeak Bluetooth OBD2 App and BimmerCode

Connecting your BMW or Mini to BimmerCode is a breeze with the Veepeak Bluetooth OBD2 adapter. This guide provides step-by-step instructions for establishing a connection using both Android and iOS devices. Before starting, ensure your vehicle and adapter are compatible by visiting https://bimmercode.app/cars.

BimmerCode Connection Guide using Veepeak Bluetooth OBD2 Adapter

This guide outlines the connection process for BimmerCode using a Veepeak Bluetooth OBD2 adapter. Please note that G series BMWs and pre-2008 models are not currently supported.

Android Connection Steps:

1. Locate and Connect: Plug the Veepeak Bluetooth OBD2 adapter into the OBD port, typically located in the driver-side footwell. Turn on your car’s ignition.
2. Disconnect Existing Bluetooth Connections: Disconnect any Bluetooth connections on your Android phone, including the connection to your car’s iDrive system.
3. Enable Airplane Mode and Bluetooth: Turn on Airplane mode on your Android device. Then, enable Bluetooth. This helps prevent interference.
4. Pair with Veepeak: In your Android Bluetooth settings, search for and pair with the device named “VEEPEAK.”
5. Configure BimmerCode: Open the BimmerCode app, navigate to Settings, and select “Veepeak OBDCheck BLE/BLE+” as the adapter type.
6. Establish Connection: Tap “Connect” on the BimmerCode app’s start screen.

iOS Connection Steps:

1. Connect and Ignite: Plug the Veepeak Bluetooth OBD2 adapter into the OBD port in the driver-side footwell and turn on your car’s ignition.
2. Enable Airplane Mode and Bluetooth: Enable Airplane mode on your iOS device. Turn on Bluetooth and turn off Wi-Fi.
3. Disable CarPlay and iDrive Connection: Disable CarPlay in your iOS settings (Settings > General > CarPlay > Select car > Disable CarPlay). Disconnect your iOS device from your car’s iDrive system (COM > Mobile devices > Select the device > Disconnect device).
4. Disconnect Other Bluetooth Devices: Disconnect any other Bluetooth connections on your iOS device.
5. Maintain Proximity: Keep your iOS device close to the Veepeak adapter for optimal connection strength.
6. Configure BimmerCode: Open the BimmerCode app and go to Settings. Select “OBDCHECK BLE or BLE+” as the adapter type.
7. Establish Connection: Tap “Connect” on the BimmerCode app’s start screen.

For more detailed information and troubleshooting, refer to the official BimmerCode manual: https://bimmercode.app/manual/.