Maximize VM Storage Performance Proxmox SATA Passthrough Unleashed

In VE 6.1-7 and probably newer you can go to the "Hardware" tab under the vm click on the drive you want to remove and click "Remove" or from the Node Shell. This post guides you through using PCIe passthrough for SATA expansion cards, ensuring TrueNAS can manage disks directly, reducing virtualization overhead and ... I haven't found any recent solution to passing through a SATA optical drive to a Windows VM. I have tried the following which shows up in ... If the drives in Proxmox are setup with a ZFS RAID and TrueNAS uses a single virtual disk that resides on this, wouldn't that be alright? Or, is ... ... Disk Health Monitoring. 3.8. Logical Volume Manager (LVM). 3.9. ZFS on ... For PCI(e) passthrough the CPU needs to support the VT-d/AMD-d flag. 2.1.3 ... I have a Intel Board with onboard SATA Controller. Is it possible to pass-through some of this SATA-HDD drives to a virtual machine (KVM because Windows and ... We see write to the sata disk inside the VM is just a little bit slower then on the host, but writing to the sas disk is less than half as fast as bevore. ... passthrough the onboard SATA controller in the first place). This ... I'm not overly familiar with Proxmox specifically, but assuming its HDD ... I've got a Proxmox 8.0 setup with 4 disks passed through to a TrueNas Scale VM. This works perfectly, no issues. I have purchased more disks and a SATA ... New Member · I've recently read that using that passthrough is not a good idea for NVMe and SSD, as the trim function isn't automatically set up.