Enhance Your Video Quality Unlock the Potential of Subs Passthru

ML subs offer both line level (from preamp) and speaker level (from amp) connections. I've always used the former with my BF 210's. If you are doing DVB-sub-to-DVB-sub and you want to pass through all the captions tracks from the input to the output, create one captions selector for all ... I have sub-process call with no data pass-through in branch ... That said, the ability to run a shape "once", effectively disregarding the input ... In other words, you can connect the output of your mixer to the input of the subwoofer, and the output of the sub to the inputs on the speakers. ... pass thru config to serve my subs via a low level connection. ... The thing is, most people say when feeding your subs a high level input, they ... If your amp doesn't have this, you will need an active sub that has high level signal pass through. Simply connect one of the channels to the ... If Your Receiver Doesn't Have A Subwoofer Output and Your Subwoofer Doesn't Have Speaker Level Inputs: You can use the Tape Monitor or Pre-Amp ... The outputs are direct pass-through of the input signal so it is not affected by the subwoofers DSP, so there is no degradation to the signal. We have chosen to ... The speaker output connections on a subwoofer are powered by your receiver (or other amplifier) if you use the speaker level inputs on the subwoofer. For basic amps, are subwoofer shoppers limited to subs with high level speaker wire inputs AND outputs? I know REL has another method for ...