Sublime Sub Passthru Harnessing the Power of Innovation

And yes, most all powered speakers will have a high-pass feature when they are used with powered subs (best from the same manufacturer) and the ... The speaker level inputs and outputs are there so you can connect an amplifier speaker output to the sub then the sub to the speakers. In this configuration, you probably have line-level input (RCA jacks) or an optical cable or HDMI digital input going into the subwoofer box. Subs typically accept low-level input (RCA usually but XLR falls under this category too) and high-level input (speaker wire connection). To prevent cancellations and other weirdness, one input may be attenuated by 6dB or so, especially if the sub offers passthrough to the main ... The present 'system' consists of a laptop into a Temple Audio Stealth stereo power amp (single stereo RCA input/no volume control) and into a ... Simply run an RCA cable from sub 1 RCA pass thru output to sub 2 input -. Or simply run a balanced XLR cable from sub 1 pass thru output to sub 2 input -. The ... Some have line-level "pass-through" so you get a full active crossover with the signals going to your main amp (or active speakers) are high- ... I surmise that "Pass-Through" means just that. Another clue: the presence of a footswitch jack to allow monitoring with and without the sub. If ... For basic amps, are subwoofer shoppers limited to subs with high level speaker wire inputs AND outputs? I know REL has another method for ...