Revolutionize WAN Connectivity Wan Passthru for onBGW210-700

So if you want your own router behind the AT&T Gateway, you need to configure the Arris device for IP-Passthrough. I successfully did this ... In the mean time, I'm having to use AT&T DSL. The modem they have given me is a BGW210-700. I also have a five pack of static IP's and three ... You will connect the new router's WAN port to the BGW320 5Gbps port and set the BGW320 into IP passthrough mode. At that point, your new router ... ... (BGW210-700) using the following steps. Inspect the router stickers to find ... IP Passthrough should not be used for most home networks. On the Modem, Leave DHCP Mode On; Under IP Passthrough, set DHCPS Fixed. Choose the Local IP / Mac of your Router. Disable Firewall Features. 1) Open browser and go to 192.168.1.254 · 2) Go to Firewall > IP Passthrough · 3) Change Allocation Mode to "Passthrough", and Passthrough Mode to ... When I first had my nest wifi pro system, I set it up in IP passthrough mode and everything worked fantastically. I was working home during the pandemic ... I use the BGW210 in IP Passthrough to a Netgate firewall with no issues. I used the switch bypass for about 18 months with no issue as well ... TLDR they have ATT Fiber coming from a BGW210-700 Modem and im trying to install an xg115. ... wan allowing everything. Long story short I ... IP Passthrough: This configuration is the closest to actual bridge mode as the Arris will pass through its WAN IP address (your public IP ...