Simplify Network Deployment with PoE Passthrough on EdgeRouter

Versatile PoE Capability. Powered by 24V passive PoE or a power adapter, the EdgeRouter X features a passive PoE passthrough option* to power an airMAX device. EdgeRouter 12. • (10) Gigabit RJ45 routing ports. • 24V PoE input on port 0. • 24V PoE passthrough option on port 9. • Ports 0-7 can be configured for line-rate ... Some EdgeRouter models support PoE in and some support PoE out, this section will help clear up which devices support what features. Device. Type of PoE out. The PoE settings are set to Off by default. WARNING: device supports passive PoE and the supplied voltage. 1. On the Status tab, click the Ports tab. • “Configure the Switch (EdgeRouter PoE)” on page 14. • “Configure the Switch ... - Passthrough To allow passive PoE pass through, select Passthrough. Passive PoE Passthrough. The EdgeRouter X can be powered by either method: • Power adapter. • 24V passive PoE on the eth0/PoE In port. Passive PoE output on ... Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the EdgeRouter PoE. 2. Configure the Ethernet adapter on your host ... The standard model, the ER-X, can be powered by an external power adapter or 24V passive PoE input. A passive PoE passthrough option1 is available to support a ... The EdgeRouter 6P and PoE include configurable PoE ports to power airMAX® products, and the EdgeRouter 12 has a PoE input port and a PoE passthrough port. The router can supply PoE out (passthrough) on the eth4 port. This is controlled with GPIO 0. Note: Supported Voltage Range is 9 to 26VDC. The ...