Empower Your Business Enhance Faxing Efficiency with NSE Fax Passthru

This enables sending FAX passthrough signals and detection of incoming FAX passthrough signals using the Cisco proprietary method. The NSE payload-type number, ... FAX Passthru Method: NSE; FAX Process NSE: yes (on fax lines in particular); FAX Disable ECAN: yes (on fax lines in particular); Hook Flash Tx ... Set FAX Passthru Method to NSE, FAX Passthru Codec to G711u and Use Pref Codec Only to Yes. Go to the Supplementary Service Subscription section and set ... Fax Passthru Codec: G711a. Fax Passtrhu Method: NSE. Fax Process NSE: Yes ... FAX Passthru Codec:G711u. FAX Codec Symmetric:no. FAX Passthru Method:None. ... fax uses pass-through method. voice service pots. fax rate disable ... modem passthrough nse codec g711ulaw. session target ipv4:192.168 ... based switchover method. In the case of fax passthrough, you have NSE-based passthrough and protocol-based fax pass-through as shown in Figure 2. FIGURE ... nse: Uses the named signaling event (NSE) mode to switch to modem pass-through. payload-type number: Specifies the value for the NSE payload type, in the range ... fax protocol none. modem passthrough nse codec g711ulaw. h323. h225 display-ie ccm-compatible. call start slow. call preserve. sip. bind control ... FAX Passthru. Method. Select the fax passthrough method: None, NSE, or. ReINVITE. Default setting: NSE. DTMF Process. AVT. To use the DTMF process AVT feature, ... DTMF Process AVT: yesno FAX Passthru Method: NoneNSEReINVITE. DTMF Tx ... FAX Process NSE: yesno Hook Flash Tx Method: NoneAVTINFO. FAX ...