Faxing Innovation Passthru Method vs. Reinvited

729). - Fax is detected at called-party, initiating the re-INVITE proposing G.711 A-law and T.38. - The originating SIP UA rejects the T.38 offer, answers with ... 38 re-INVITE SHOULD initiate the subsequent re-INVITE to fax pass-through mode. J-F. Mule/J. Li 6 SIP T.38 Call Flows February 2002 Refer to section 6.2 for ... FAX Passthru Method. DTMF Tx Method. FAX Process NSE. Hook Flash Tx Method ... Select the fax passthrough method: None, NSE, or ReINVITE. The default is ... ... fax-modem and ... Passthru Method: ReINVITE > DTMF Tx Method: AVT DTMF Tx Mode: Strict > DTMF Tx Strict Hold Off Time: 40 FAX Process NSE: no > Hook Flash Tx ... Protocol-based pass-through uses specific messages within the H.323 or SIP call control protocols to switch a voice call to a G.711 passthrough call. T38 faxes still work fine for me even with the notice. You can change FAX Passthru Method to REINVITE and the notice goes away and T38 still ... FAX Passthru Codec, G711u. DTMF Process INFO, yes, FAX Codec Symmetric, yes. DTMF Process AVT, Yes, FAX Passthru Method, ReINVITE. DTMF Tx Method, Auto, DTMF Tx ... Can be set in a SIP->PSTN dialplan rule. If dialplan_go_on=1 and the rule matches, but there are no free PSTN ports in the set of ports defined ... 30 fax or it won't work. If you are using txfax for sending and rxfax for receiving, remember to use the same codec at both ends. Invoking the ... The caller (or callee) issues a ReINVITE indicating it wants to change the call to FAX. The caller (or callee) embeds FAX tones in the RTP stream. For both ...