Redefine Faxing with Fax Passthru Method A New Era of Efficiency

... fax is still working, but outbound faxing still is not possible. I put up a flow-chart (by wireshark) and a dump of the relevant re-invite ... Log into your Cisco ATA WebGUI and navigate to the Voice Line 1 option. Under the NAT and Network Settings set the following options. Fax Mode to Pass-through; Jitter buffer to fixed and high; Disable ... Optional: (Re-INVITE After Fax Tone Detected: → Disabled). Configuring Cisco ATA · Fax Passthru Method - ReINVITE · Fax CED Detect Enable - Yes · Fax CNG Detect Enable - Yes · Fax Disable ECAN - Yes · Fax Enable T38 - Yes ... This option is the time we wait after we got the CED, to get V21 flags. This is to avoid to send a SIP re-invite in passthrough and few ms after ... FAX PASSTHRU CODEC: G711u FAX CODEC SYMMETRIC: yes. FAX PASSTHRU METHOD: ReINVITE. FAX PROCESS NSE: yes. FAX DISABLE ECAN: no. FAX ENABLE T38 ... 38 FAX requests by sending a reINVITE with. T.38 information to the ESBC. The ... • If Passthrough is selected on either side, then the ESBC will let the FAX ... Part of the standard operation of "modem-passthrough" is to re-INVITE when fax/modem tones are detected. This setting is what we recommend in your case, so ... ... pass through all proxies that elect to receive it. This capability is ... For example, it could contain URIs for phones, fax, or irc (if they were ... ... FAX tone is detected on the PSTN side, FS receives a T.38 > > re-INVITE ... pass the PCMU reINVITE through to the > other leg. > > 2009-03-31 00:30:50 ...