Unlocking FAX Passthru Efficiency NSE vs. ReINVITE – The Ultimate Comparison

Select the fax passthrough method: None, NSE, or. ReINVITE. Default setting: NSE. To use the DTMF process AVT feature, select yes. Otherwise, select no ... • FAX Passthru Method: ReINVITE. • FAX Process NSE: yes. • FAX T38 ECM Enable ... • FAX Tone Detect Mode: caller or collee. • FAX T38 Return to Voice: no. ... reINVITE packet. ... By doing my research on this forum and elsewhere, everyone was pointing at the SIP Passthrough settings and the ports 5060/ ... FAX Passthru Method. Select the fax passthrough method: None, NSE, or ReINVITE. The default is NSE. DTMF Tx Method. Select the method to transmit DTMF ... NSE (Named Signaling Events) is a proprietary protocol to switch from voice to passthrough for fax/modem communication without involving SIP. ... pass-through { g711ulaw | g711alaw } } ]. no faxprotocol. nse ... 38 fax relay and NSE attributes at the time of call setup. Do not ... fax-modem and ... DTMF Process AVT: yes FAX Passthru Method: ReINVITE. DTMF Tx Method: AVT DTMF Tx Mode: Strict DTMF Tx Strict Hold Off Time: 40 FAX Process NSE: ... After about 3 hours of tinkering Vonage and I discovered that changing the the FAX Passthru Method from ReINVITE to NSE on the Voice>Line 1>Audio Configuration ... ... ReINVITE from one of the legs to passthrough > to the other leg? Does ... Instead they're trying a PCMU ReINVITE and the problem I'm seeing is that if ... as yes, Silence Supp Enable as no, Echo Canc Enable as no,and FAX Passthru Method as ReINVITE. ... FAX Process NSE, yes. Hook Flash Tx Method, None, FAX ...