Unveiling the Secrets of Fax Passthru Method in NSE

nse: Uses the named signaling event (NSE) mode to switch to modem pass-through. payload-type number: Specifies the value for the NSE payload type, in the range ... MGCP T.38 Fax Modem NSE Passthrough Configuration This is a working config copied off a branch router (2851 running 12.4(24)T2 to avoid MGCP ... Set FAX Passthru Method to NSE, FAX Passthru Codec to G711u and Use Pref Codec Only to Yes. Go to the Supplementary Service Subscription section and set ... FAX CNG Detect Enable: yes. FAX Passthru Codec: G711u FAX Codec Symmetric: yes. FAX Passthru Method: NSE FAX Process NSE: yes. You missed out Note: If you need to configure fax pass-through to work with Cisco CallManager (CCM), you must use the modem passthrough nse command. The fax ... Audio Configuration settings for fax capabilities. No changes ... Fax Passthru Method = ReINVITE; Fax Process NSE = no; Fax Disable ECAN ... NSE (Named Signaling Events) is a proprietary protocol to switch from voice to passthrough for fax/modem communication without involving SIP. modem passthrough {NSE [payload-type number] codec ... it may override the precedence of fax/modem pass-through and cause the fax transmission to fail. VBD - fax pass-through method as defined in ITU-T V. ... When one gateway or endpoint tries to switch to Cisco NSE pass-through or relay which the ... FAX Passthru. Method. Select the fax passthrough method: None, NSE, or. ReINVITE. Default setting: NSE. DTMF Process. AVT. To use the DTMF process AVT feature, ...