Break Free from Limitations Ford PCM Programming Passthru Liberation

I heard that if I use a J2534 pass-thru device with Ford FJDS and an active license, that I cannot program modules on the MS-CAN bus even with J2534-2 ... It can also be done with FMP and a pass-thru device, but ids will do it. You do have programming available I take it? Please don't forget the ... I have used the J-box in the set to program GM & Ford since we got it, and it was on the approved compatible tool menu on both of their ... Ford uses their own very annoying system for programming, you ... pcm you are using with a passthru tool to program ecm's. Most cities ... Using a j2534 pass through device, we replace the pcm and reprogram as well as reset the pats parameters . Confirmed fix. PCMflash is an integrated software solution intended for reprogramming ECUs and TCUs of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, ... I use Fords J2534 software to reprogram a used PCM for a 2006 F250 Gas 5.4, I have used IDS before with the VCMII, this is very similar. ... Ford IDS) and got it working again. Whilst I had the 3 day MMP ... The versatuner cable at $170 they sell directly is also SAE J2534 PassThru ... ... Programming Pass Thru Device. ... Programming & Installation of new ECU's, PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc. 2. Live Data-stream with ... You will need a SAE J2534 pass through device, you will be able to find on google.