Empower Your Router Port Forwarding with IP Passthru for Enhanced Control

I have setup static routes to make it work. I have a basic firewall rule that forwards port 80 to my webserver. The problem: When I forward ... Go to Network Center > Port Forwarding > Port Forwarding. Click Create to open the setup window. Specify the Name, Private IP address, Public port, Private port ... I got it to work? Instead of doing port forwarding, I went to Firewall > IP Passthrough, and I changed my allocation mode from "Passthrough" to ... Connect a device to the LAN1 Ethernet port. · Sign in to the Admin Web UI. · Repeat steps 2-5 above to uncheck the IP passthrough. Select Custom Services. · Enter the name for the application or device in Service Name. · Enter the port(s) you wish to open for Global Port Range ... This is useful if you have a device connected to the router and you want the global IP address from WAN on the router. This setup makes port forwarding much ... The router is connected to the modem via IP passthrough. Is there an issue with setting up this way? I would think that the issue would be port ... AT&T does do some things I'm not crazy about (no true bridge mode) but the ip-passthrough works well enough and I did not detect a double NAT. Successful Port Forward (and reliable internet). Issue: The Cradlepoint has NAT and IP Passthrough (bridge) modes. The USG is enabled as the primary DHCP ... I'm not sure you need IP Passthrough active on the AT&T gateway. ... On the AT&T gateway, create a port forwarding rule pointing to the IP ...