Optimize Remote Access Port Forwarding with IP Passthru for Secure Connectivity

how do I do port forwarding on my airport extreme for my IP camera (foscam)? ... IP passthrough and NAT (to mention a few).. Is there anything you ... You do not port forward on a modem, only the router. The modem is a pass through device, it provides a routable IP address to your router. ... can now get xcp-ng vm to get all the public ip From my /27 and /29 subnet and do port forwarding for all my internal network servers. Select Custom Services. · Enter the name for the application or device in Service Name. · Enter the port(s) you wish to open for Global Port Range ... I got it to work? Instead of doing port forwarding, I went to Firewall > IP Passthrough, and I changed my allocation mode from "Passthrough" to ... Hit “Add.” Under IP Passthrough. make sure the allocation mode is “Passthrough.” Passthrough Mode should be DHCPS-fixed. You can ignore the ... Note that specifying a WAN or VPN only allows one port forwarding for each external port per WAN IP. Additionally, Port Forwarding is not ... No, you should only have to do the port forwarding on the Asus router. IP passthrough isn't set up correctly. If it was, your router's WAN IP ... IP Passthrough allows you to assign a public IP address to a device connected on your network. NAT is used by the router to direct the correct data packet. Make absolutely sure your Asus router is the only device connected to the ATT gateway. Disable all of the radios on the BGW320. Enable IP passthrough.