Enhance Your Audio Experience Unleash Passthrough Audio in VLC

Basically, VLC cannot itself process 'patented' audio codecs, for licensing reasons; it can only pass them to an external decoder. – Tetsujin. ... (VLC) on Windows at full 1080p HD with audio. This is also a great alternative to PS4 Remote Play if you don't have a great connection or can ... I am unable to get DTS/DD 5.1 audio from the motherboard S/PDIF output, when playing media via VLC 3.0.4 or Media Player Classic, from downloaded media/test ... ... pass through all audio for an AVR to decode. That would be fine if the Playbar could handle DD+ but it can't. Expand. Best to get that ... Under the Audio tab, change the output module to "Windows Multimedia Device output" and set HDMI/SPDIF audio passthrough to" Enabled (AC3/DTS ... ... make life a ... VLC app in order to have 5.1 multichannel audio output: [Settings] > [Extra Settings] > [Audio] > [Digital audio output (passthrough)]. Passthrough is activated when you chose RAW Modus and forward your Audio to AVR Receiver. Audio setting must then be set as Automatic -Surround ... In VLC->preferences->audio look for HDMI/SPDIF pass-through is this set to disabled or enabled ? If disabled then the audio is decoded to PCM ... The two functions that will allow you to perform this are likely to be mediaplayer.SetOutputDevice mediaplayer.SetAudioOutput. AAC audio pass through is not supported at the moment. But, ac3 should work. If you have custom codecs, kindly remove it & check again.