Elevate Your Audio Subs Passthru for Immersive Sound

Sub inputs to OUT left and right; Power amp inputs to OUT blue and green. Select input 1 when using the Schiit, input 2 when using the HTR. Connect using an RCA cable if there isn't an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output ... When using an AVR's built-in crossover—the most common scenario—its subwoofer output connection sends a low-pass filtered signal derived from ... I dug up an old Jamo passive subwoofer that has stereo input with normal speaker connectors (eg it has 4 connector). It is designed to pass ... According to DefTech (online manual), if you use the high level inputs, the crossover in the sub sends everything over 80 Hz to your mains. The ... For basic amps, are subwoofer shoppers limited to subs with high level speaker wire inputs AND outputs? I know REL has another method for ... IIRC some speaker level inputs are pass-through and incorporate a high and low pass filter. REL subs don't do that. REL reviews would probably ... Some have line-level "pass-through" so you get a full active crossover with the signals going to your main amp (or active speakers) are high- ... Note that one that sub, two of the speaker level connections are "inputs" and two are "outputs". The posters above went over it already, but ... If you want you can also have a shop fabricate you a custom box and make the bass enter the cabin through the top rear deck. UA_civ_eng 01:33 PM 09-14-2015.