Elevate Your VoIP Experience Discover the Power of Yealink Passthru VLAN

I'm demoing my first ArubaOS-CX switch and have run into an issue with VoIP phones with network pass-through. Below is the only configuration I have found to ... CTP18 will prompts “Switch to BYOD passthrough” , tap Switch. ... The switch assigns a VLAN ID to the endpoint/touch panel through the LLDP ... Configure VLAN 2 as the voice VLAN and configure the interface to allow voice packets to pass through. Configure a VLAN ID-based voice VLAN ... So I have a better understanding, is anyone able to explain the WAN and PC port VLAN tagging on the Yealink phones for me. I understand the VLAN taggi... I did not turn off the Peplink SIP ALG, but did add port 5080 under Peplink/Network/Misc/Service Passthrough/SIP/Define Custom signal port. I am attempting to setup 2 VLANs, one carry VoIP traffic and the other to carry data. My challenge is each workstation only has 1 ethernet drop. destined for, the external device are allowed to pass through the 802.1x controlled port. ... vlan 101 name sip-server vlan 2,20,30,40,100-101 state enable ! Yealink,Conference Phone,IP Phone,sip phone,voip phones,wireless headset. Products; Solutions; Support; Partners; Company.. EN. English Español Deutsch ... You will have to tell the phone to use VLAN 2 and that the pass through PC port needs to be VLAN 1. Yealink has a spot to do this in the phones ... VLAN (Virtual Local Area Network) is used to logically divide a physical network into several broadcast domains. VLAN membership can be configured through ...