Unlock the Potential of Yealink Passthrough VLAN A Step-by-Step Guide

3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 13,455, 03-24-2022 10:25 PM Last Post: maindriver · Passing only ... If you want to allow other VLANs to pass through the LAN port, you need to create a sub-interface under the LAN interface, ... How to access your phones settings to review and change your VLAN settings. This is important if you decide to factory default your phone ... I'm demoing my first ArubaOS-CX switch and have run into an issue with VoIP phones with network pass-through. Below is the only configuration I have found to ... You will have to tell the phone to use VLAN 2 and that the pass through PC port needs to be VLAN 1. Yealink has a spot to do this in the phones ... If an IP telephone does not support 802.1X, you can configure VoIP to bypass 802.1X and LLDP-MED and have the packets forwarded to a VoIP VLAN. Multi Domain ... 3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 13,828, 03-24-2022 10:25 PM Last Post: maindriver · Yealink C920 ... 3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 14,014, 03-24-2022 10:25 PM Last Post: maindriver · Directory DSS ... 3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 13,828, 03-24-2022 10:25 PM Last Post: maindriver · Limit maximum ... The endpoints are either desktops (untagged/native VLAN) or telephones (Yealink Teams Handsets) which have a VLAN on their WAN port with the ID 20 and untagged/ ...