Empower Your Yealink Phone with Passthru VLAN for Enhanced Connectivity

The PC ports on these phones are basically a daisy-chain port; they allow an IP phone and a computer to share a single network drop by basically daisy-chaining ... With HP switches and Yealink phones with 3CX, you'd untag the phone VLAN, and tag the PC VLAN, then put the PC VLAN ID into the box for the LAN ... The endpoints are either desktops (untagged/native VLAN) or telephones (Yealink Teams Handsets) which have a VLAN on their WAN port with the ID 20 and untagged/ ... We have 2 VLAN's for the network: VLAN 30 (Data) ... A lot of phone vendor support CDP (yealink, grandstream with latest firmware etc). I will try to find this. I have Yealink - T42G. Yes, I assign the ports, I've made many tries with different phones, ports and so on. Thank you. P. I did not turn off the Peplink SIP ALG, but did add port 5080 under Peplink/Network/Misc/Service Passthrough/SIP/Define Custom signal port. When I plug a PC into the PC port on the phone, the PC does not get a network connection (no IP address, cannot reach DHCP server). The phone ... How to access your phones settings to review and change your VLAN settings. This is important if you decide to factory default your phone ... There is only one way to get VLAN ID for PC port: Manual. Note. VLAN Discovery Method on Yealink Phones. Automatic Discovery Method for VLAN. LLDP. You will have to tell the phone to use VLAN 2 and that the pass through PC port needs to be VLAN 1. Yealink has a spot to do this in the phones ...