Revolutionize Your VLAN Management Yealink Passthrough Unleashed

So I have a better understanding, is anyone able to explain the WAN and PC port VLAN tagging on the Yealink phones for me. I understand the VLAN taggi... Our computers connect to a pass-through port on the phones, and are on the default vlan (id 1), with IP address range 10.1.1.0/22. We use shared ... Use the Network Setup > Advanced Settings pages to configure features including port flow control, MAC address cloning, VPN passthrough, and ... Configure VLAN 2 as the voice VLAN and configure the interface to allow voice packets to pass through. Configure a VLAN ID-based voice VLAN ... The computer connects to the switch through the phone, what's referred to as “pass-through”. This arrangement halves the number of ports on the ... If an IP phone is connected without any device in the passthrough/pc port, then it fails to get Auto Voice vlan and ends up on guest vlan. I did not turn off the Peplink SIP ALG, but did add port 5080 under Peplink/Network/Misc/Service Passthrough/SIP/Define Custom signal port. You will have to tell the phone to use VLAN 2 and that the pass through PC port needs to be VLAN 1. Yealink has a spot to do this in the phones ... There is only one way to get VLAN ID for PC port: Manual. Note. VLAN Discovery Method on Yealink Phones. Automatic Discovery Method for VLAN. LLDP. Yealink T4U series uses SIP over Transport Layer Security (TLS/SSL), which is the latest network security technology. It's also compatible with ...