Unleashing the Full Potential of Yealink Passthrough VLAN

So I have a better understanding, is anyone able to explain the WAN and PC port VLAN tagging on the Yealink phones for me. I understand the VLAN taggi... ... pass through untagged traffic to the PC port on the phone. If you want the phone and the workstation to be on the same VLAN, then you should ... If you want to allow other VLANs to pass through the LAN port, you need to create a sub-interface under the LAN interface, ... The computer connects to the switch through the phone, what's referred to as “pass-through”. This arrangement halves the number of ports on the ... Voice VLAN: 4. Therefore, you can plug a device into the passthrough to get a VLAN 2 address, whilst the phone picks up the VLAN 4 address. 4 ... 3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 13,968, 03-24-2022 10:25 PM Last Post: maindriver · Configuring ... How to access your phones settings to review and change your VLAN settings. This is important if you decide to factory default your phone ... If an IP telephone does not support 802.1X, you can configure VoIP to bypass 802.1X and LLDP-MED and have the packets forwarded to a VoIP VLAN. Multi Domain ... 3CX / Yealink passthrough VLAN issue (when phone is rebooted) · maindriver, 4, 13,735, 03-24-2022 10:25 PM Last Post: maindriver · View a ... By setting Port 1 as tagged, you allow traffic from VLAN10 to pass through ... I am also running another SIP phone (Yealink W60B) on the same VLAN ...