The Essential Guide to AAC vs. DTS Passthrough Enhancing Your Listening Pleasure

The sound system can get Dolby and DTS 5.1 signal, but only over Optical and Digital Coax. The TV is Dolby passthrough but not DTS passthrough. Once you have selected the Audio and Video channels, make sure video is set to “Pass Thru”. In the audio options, select AC3 (5.1) and deselect ... AAC's higher compression rate compared to DTS results in smaller file sizes for equal-quality audio. In addition, HandBrake can passthru the following source audio track formats: AC3 and E-AC3; DTS, DTS-HD; TrueHD; AAC; MP3; FLAC. This article is part of the ... AAC generally is not passed through over HDMI, it must be decoded to PCM (or transcoded to AC3 or something as configured). ... dts-iec61937;mpeg2-aac-iec61937'. I checked with pactl list sinks if ... Kodi will send source AC3 or DTS signal or transcode others to AC3. – ...

First, AC3 et al. They are terms for audio, as Richard Berg explained.

Next, AC3filter. If you have it set to passthrough AC3, ... I encode at a bitrate of 160 kbps. If I include an AAC track and an AC3 passthru track, the audio uses either 160+192 kbps or 160+384 kbps, ... It allows audio on blu-ray to sound smoother and fuller than on dvd. It uses an encoder similar to AAC. If you give it a WAV file, it will re- ... Your AV receiver cannot decode multichannel AAC. If yiou are getting surround then you are applying upmixing to the audio. Plus the fact that no ...