Transform Faxing Workflows The Power of the Fax Passthru Method

When I use G.711 Pass-Through almost every fax has a transmission error, some to the extent where after 6 retries it fails the fax which is why ... One of the methods, G.711 fax pass-through mode, works similarly to a PSTN-based fax call with originating FAX machine converting the T.30 fax call to a PCM ... During a fax call what we have noticed is that when the ATA sends a reinvite with g711ulaw as its codec to Asterisk. Asterisk does not forward ... 38 re-Invite is received, the ATA will reject it and continue the transmission in 711 pass-through mode. To address the PCM clock sync mismatch ... ... FAX Passthru Method is set to NSE. T38 faxes still work fine for me even with the notice. You can change FAX Passthru Method to REINVITE and ... In an inbound fax call to an analog fax machine, after an RTP session is established a re-invite is sent from CM to SM with M attribute as ... ... pass through all proxies that elect to receive it. This capability is ... For example, it could contain URIs for phones, fax, or irc (if they were ... Calls work great to 29:59. At 30 minutes we get a second re-INVITE from our provider (AT&T) and the outbound audio drops. Note: For T.38 fax support, enable the feature by setting Fax Passthru Method to ReINVITE under the Line tabs. Note that if a T.38 call cannot be set up, ... ... FAX tone is detected on the PSTN side, FS receives a T.38 > > re ... pass-through with special > > codec characteristics - > -silence ...