Maximize Internet Reach Set Up Port Forwarding with IP Passthru

I have it in IP passthrough mode and its connected to my personal home router, Netgear Nighthawk XR700. I have created a set of port forwarding ... ... can port forward from it, I'll check. If you have the SRP in line with the customer product, wouldn't it be better to use the SRP NAT functionality to hide ... I'm not sure you need IP Passthrough active on the AT&T gateway. ... On the AT&T gateway, create a port forwarding rule pointing to the IP ... ... can now get xcp-ng vm to get all the public ip From my /27 and /29 subnet and do port forwarding for all my internal network servers. IP Passthrough allows you to assign a public IP address to a device connected on your network. NAT is used by the router to direct the correct data packet. You would need to enable port forwarding on your Modem (where your internet comes in). Your modem may or may not have port forwarding features. I have setup static routes to make it work. I have a basic firewall rule that forwards port 80 to my webserver. The problem: When I forward ... Verify the ports are open in the LAN first. If you did all the needful to get 32400 open, then copy those steps for your new ports. Is Plex ... Now, however, I am facing a problem where port forwarded services do not work. ... IP Passthrough, and more, but no matter what--nothing helps. I cannot get this to work with Milestone. Anyone have experience with Comcast gateway in passthrough mode? Thanks.