Empower Your Network Mikrotik WAN Passthrough for Seamless Integration and Enhanced Security

again. LTE inteface can be passthrough to other ethernet port of other ETHERNET device. Of course you can do a "bridge-wan with sfp+ and ... ... ip firewall filter add action=add-dst-to-address-list address ... passthrough=yes add action=mark-packet chain=prerouting connection ... Preliminary setup: You will need to set up the two WAN connections. Assume IFC1 to be the first WAN port (e.g. ether1 ) interface and IFC2 ... Anybody using HA behind Mikrotik? How do you pass through the connection? Mind share your experience ... mikrotik to redirect to local ip. The first step is to configure the two PPPoE clients, one for each WAN connection. The primary PPPoE connection will be set with the default ... ... WAN connection gets no traffic. The 2 WANs are RAIN 5G and Telkom LTE; Rain 5G is on Ether 1 and has IP Passthrough enabled so i get a 10. The MikroTik passthrough is completely layer 2, i.e. all traffic from the chosen passthrough MAC address is forwarded to the LTE interface and vice versa ... VMware ESXi. There are not really configuration changes in ESXi other than default settings, only one thing that is configured is Pass-Through ... I have two WAN connections. One is fibre provided by PPPoE (ether1), the other DHCP (ether7) from a Mikrotik LTE dish configured for passthrough ... You can request ( and most likely to have to pay for) an public IP from your ISP, then it will be assigned to your pppoe connection.