Master Network Control Mikrotik WAN Passthrough for Unmatched Precision

The first step in configuring an LTE router for passthrough is accessing the router's management interface. This can be done through either Winbox or the ... A step-by-step guide to take your rural network to the next level without breaking the bank. https://mikrotik.com/product/lhg_lte6_kit. Send bridged un-encrypted PPPoE traffic to also be processed by IP/Firewall. This property only has an effect when use-ip-firewall is set to yes ... Obviously, I need to keep the passthrough mode as my provider serves me a public IP (no cgnat) but would also like to retain access to the admin ... I was able to connect it to a single PC which gets the public LTE ip. I can also plug ethernet 2 to one of the WAN ports of my dual router ... ... passthrough=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN4 new-connection-mark=WAN4_conn passthrough=yes add action=mark ... I've got a mikrotik LTE router which has enabled lte passthrough mode to my pfsense box. Pfsense obtains ip over dhcp from mikrotik router, and is able to NAT ... It adds persistent user sessions, i.e. a particular user would use the same source IP address for all outgoing connections. Consider the ... ... passthrough=yes per-connection-classifier=\ both-addresses-and-ports:2/0 src-address=10.10.10.0/24 add action=mark-connection chain ... 1) create a bridge also for WAN interface and attach WAN ethernet port to it. · 2) create 2 VLAN4 interfaces. · 3) create a 3rd bridge and bind ...