Revolutionize Network Administration Mikrotik WAN Passthrough for Hassle-Free Management

With the peplink router I have 2 Celluar WAN's, 2 Wifi WANs, 2 Ethernet WANs. I use their special service to bond them together to get better upload speeds. Port Forwarding Step by Step using Mikrotik RouterOS Learn how to easily provide access to internal resources using private IP addresses by ... new-connection-mark=ISP1_conn passthrough=yes per-connection-classifier=\ both-addresses:2/0 add action=mark-connection chain=prerouting ... If I remove VLAN 99 from bridge and add it as slave on ether ports between routers, LTE passthrough add addresses well, and can ping from Router ... ... passthrough=yes per-connection-classifier=\ both-addresses-and-ports:2/0 src-address=10.10.10.0/24 add action=mark-connection chain ... Set ether9 and ether10 into a bridge named bridge_wan. Disable all DHCP clients and servers in this bridge. Remove addresses from the ports in this bridge. #MikroTik #RouterOS #MikroTik_QOS The export of the configuration of the ... ont wan-config 0 4 ip-index 0 profile-id 1 ont port route 0 4 eth 1 enable ... add action=mark-routing chain=prerouting connection-mark=DD02 in- interface=BridgeLAN new-routing-mark=DiraWAN2 passthrough=yes. Thẻ IP → ... [admin@MikroTik] > /ip firewall filter print [admin@MikroTik] > /ipv6 firewall filter print ... passthrough 29 320 602 344 22 976 648 ... Place the WAN address you want for the phones on a bridge or switch that contains a) the port that the ISP is coming in on b) the logical "WAN" ...