Simplify WAN Connections A Step-by-Step Guide to MikroTik Passthru

The purpose is from anywhere I want to access the server/client machine without port forwarding in my MikroTik Router. ... WAN port or from LAN ... It sounds like you may need to configure the firewall to pass through the NAT traffic on the Mikrotik. This is 'masquerading'. In this video we will learn how to configure Mikrotik Router WAN ... ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough ... I would set the master wireless interface of R3 to station-bridge mode, make it a trunk port for multiple VLANs, and use the "single common ... If you enable passthrough the LTE device will only be used for IP configuration, modem settings etc... So you will have to deal only with the ... In this network, MikroTik Router's ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 ... Place the WAN address you want for the phones on a bridge or switch that contains a) the port that the ISP is coming in on b) the logical "WAN" ... ETH1 is the WAN port, ETH3 is the trunk port to the next MT router. WAN traffic is VLAN100, LAN traffic is VLAN200 on the trunk. Both VLANS ... add address-pool="pool dhcp" disabled=no interface=bridge_LAN name=\ "dhcp server". /interface bridge port ... new-connection-mark=ISP1_conn ... Ideally the WAN would come in to the HAP AC at port 1, this ... add comment="WAN Passthrough VLAN" interface=ether5-trunk-to-b1 name ...