Harnessing the Power of MikroTik Passthru WAN Port for Network Supremacy

I'm using a Mikrotik router as LTE modem. The internet connection is configured as IP passthrough on the VLAN2. Vlan3 (192.168.88.1/24) is the management VLAN. Drop All from WAN Not DSTNATed: Blocks all new incoming traffic from WAN ... Port: Specifies the destination port or range of ports for TCP or ... ... port 1 - VerizonFIOS" name=WAN1 set [ find default-name=ether2 ] ... WAN" in-interface=WAN1 log-prefix="**** drop all from WAN ****" add ... Inbound routes to WAN2 fail to pass through to Bridge2. ... no other ports are in use. Port 1 and port 2 are gateway for each subnet on separate ... Right – the only things that make a port "the WAN port" are 1) it's not bridged to the rest, 2) there's a NAT rule for outbound packets. The WAN port also supports this speed. And the router's WiFi can work with a ... Popular Router Brand. Tenda Router · TP-Link Router · Netis Router · Mikrotik ... As we need the address for port 9 which is the WAN port, we can add the last two hex number digits by 8 to get the correct MAC address (remember ... (3) NAT Router Rules (Port Forwarding) in MikroTik RouterOS ... LTE passthrough - empowering rural internet! MikroTik•20K views · 30:31. Go to ... Best way IMO would be to convert your current WAN+LAN setup to all-VLAN setup. So you would add all ports (including current WAN port to same bridge and use ... In this video we will learn how to configure Mikrotik Router WAN ... ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough ...