Unlock the Ultimate WAN Experience Leverage MikroTik Passthru for Superior Performance

add address-pool="pool dhcp" disabled=no interface=bridge_LAN name=\ "dhcp server". /interface bridge port ... new-connection-mark=ISP1_conn ... By default, connections from LAN to WAN are not restricted in any way. The only requirement us a working SRC-NAT configuration (which is there ... On the VLANs tab, check the box for port 23 on VLAN 50. Plug the Peplink LAN port into port 23 on the CRS326. On the CRS326 in the Press box, ... @moskovskiy82 Perhaps you could further explain what you mean by pass through? Are you just wanting to forward port 8123 or are you needing ... Ok for me with a MikroTik router the passthrough mode worked when 2min DHCP lease time was configured (in two places). However, I went back to ... Step 7: Bind Profile to PON Port ... gpon-olt(config)#writenow we can get internet from PON port1 by vlan 2026. That's all we successfully configure vosl gpon olt ... ... WAN passthrough=no port=22,2200 protocol=tcp add action=mark-packet chain=postrouting new-packet-mark=prio1 passthrough=no port=8291 protocol= ... Hello All, I want to use an MOTG equipped with a 3G/4G USB modem simply as “WAN selection mechanism” in front of a Mikrotik VPN router. However when I'm connected to mikrotik admin panel (through different port) I know that mikrotik sees pfsense box VIP, but still not able to ... ... ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes add chain=prerouting dst-address-type=!local in-interface ...