Harnessing the Power of MikroTik Passthru WAN Port for Network Dominance

Responses (23) ... It's actually pretty simple. Connect one of the ports on the BGW to the WAN port of the UDM Pro. You'll need to enable 'IP Passthrough' on the ... ... port was connected with User LAN. Also don't forget to rename the interface ... passthrough=yes add action=mark-connection chain=input comment ... Hello My friends..! so i have RB951ui and want the LAN 4 + 5 ports on it to use port 3 as the WAN interface like this scenario. I'm using a Mikrotik router as LTE modem. The internet connection is configured as IP passthrough on the VLAN2. Vlan3 (192.168.88.1/24) is the management VLAN. That sounds like Telus's Bridge Mode, which gives one port a public IP, and keeps another for the router to NAT behind. Upvote Here's a quick guide to setting IP Passthrough via WebFig: 1. Setup your LTE interface as normal with the correct APN (this can be set in Interfaces - LTE tab ... Ideally the WAN would come in to the HAP AC at port 1, this ... add comment="WAN Passthrough VLAN" interface=ether5-trunk-to-b1 name ... accounting-port=YYYY secret=yourSecret service=wireless timeout=1500ms ... venue-names=IronWiFi:eng wan-downlink=50 wan-uplink=50 wan-status=up 3gpp ... In this video we will learn how to configure Mikrotik Router WAN ... ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough ... Best way IMO would be to convert your current WAN+LAN setup to all-VLAN setup. So you would add all ports (including current WAN port to same bridge and use ...