Unleash Network Efficiency Mikrotik WAN Passthrough for Optimized Data Transmission

... passthrough=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN4 new-connection-mark=WAN4_conn passthrough=yes add action=mark ... Obviously, I need to keep the passthrough mode as my provider serves me a public IP (no cgnat) but would also like to retain access to the admin ... This *includes* the use/update of its DDNS address/name (mikrotik cloud). I have only partially succeeded, by forcing traffic from VL02 from the ... I have two WAN connections. One is fibre provided by PPPoE (ether1), the other DHCP (ether7) from a Mikrotik LTE dish configured for passthrough ... A straight-forward way would be to create a new bridge, move eth4 to it and add eth1 to it. Which would imediately invalidate all WAN IP setup. ISP delivers two VLANs on WAN (VLAN300 for Internet(tagged) and VLAN640 for IPTV(tagged) - VLAN640 needs to be passed through on the LAN as tagged with the ... So one thing you can try is setting the outbound interface Unbound is using using in Services > DNS Resolver. If you set that to WAN (DSL) ... If I remove VLAN 99 from bridge and add it as slave on ether ports between routers, LTE passthrough add addresses well, and can ping from Router ... The MikroTik passthrough is completely layer 2, i.e. all traffic from the chosen passthrough MAC address is forwarded to the LTE interface and vice versa ... Re: SXT LTE IP Passthrough ... 100% your provider is giving you a private IP (NAT OR CGNAT). Same will be if you are not using Passthrough.