FAX Passthru vs. Reinvited A Comprehensive Guide to the Ultimate Faxing Solution

Save your changes and you should be able to send and receive T38 faxes through your PBX now. Set your Phone Number to send SIP Username instead of Number Dialed. Select the codec for fax passthrough, G711u or G711a. The default is G711u. Select the fax passthrough method: None, NSE, or ReINVITE. The default is NSE ... Can be set in a SIP->PSTN dialplan rule. If dialplan_go_on=1 and the rule matches, but there are no free PSTN ports in the set of ports defined ... ... fax pass-through mode and the session termination. The fax pass-through call ... re-INVITE to fax pass-through mode. Refer to section 6.2 for a sample ... Almost all MAPS™ IP based simulation products supports FAX simulation using any of these two methods. Typical applications of our Fax Simulators include load ... FAX Passthru Method : ReINVITE. FAX T38 ECM Enable : Yes. Echo Canc ... Incoming faxes are delivered to each respective fax machine directly, and ... DTMF Process AVT: yes FAX Passthru Method: ReINVITE. DTMF Tx Method: AVT DTMF ... Hook Flash Tx Method: None FAX Disable ECAN: no. Release Unused Codec ... you need to find out what method the provider uses for T38 (FEC or redundancy method) ... * FAX Passthru Method: None *. • FAX Passthru Method: ReINVITE. * FAX ... All session modifications to and from the T.38 fax media will be accomplished using re-INVITEs. The CSP supports the fax pass-through mode. In this mode, the ... Passthrough or VBD is a transport method for passing modulated data such as fax, modem, and text telephone protocols over an IP network.