Master the Art of Ford PCM Programming Passthru Become a Diagnostics Expert

The j2534 protocol means that my gm nano is capable of being used as pass thru for any make for module programming. Or is it still tied to gm and its vpw and ... For the J2534 pass-thru interface, I'm using a Drew Mongoose PWM/CAN interface with the FEPS option (which allows Ford/Mazda programming). Just because the shops has the computer to reprogram the PCM (SAE J2534 pass-through device) doesn't necessarily mean they can reprogram PATS. Anyone with a J2534 pass through device, a computer, and an internet connection can program PCMs along with countless other modules. PCMflash is an integrated software solution intended for reprogramming ECUs and TCUs of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, ... I heard that if I use a J2534 pass-thru device with Ford FJDS and an active license, that I cannot program modules on the MS-CAN bus even with J2534-2 ... ... programming for a PCM is unique to that vehicle and that vehicle only. ... pass-through tool during the procedure can totally screw up the PCM. The FEPS circuit continued to be the Ford PCM programming system for years after. Even as Ford advanced through various CAN styles, FEPS remained. So, if ... Once that has been installed on your laptop, you can download and transfer the new PCM or other module programming to the J2534 interface tool ... • SAE J2534 Pass-thru Device: A device which allows the Ford Module Programming application ... calibration contained in a Ford, Lincoln or ...