Experience Audio Fidelity Like Never Before Subs Passthru for Exceptional Sound

Replaced my factory non-B&O subwoofer and amp last night. I cut the factory amp high-level input wires and wired them to the Kicker 500.1 ... I surmise that "Pass-Through" means just that. Another clue: the presence of a footswitch jack to allow monitoring with and without the sub. If ... As far as double filtering goes, if the sub has a dedicated LFE input, this always bypasses the sub's internal x-over filter, to avoid "double ... You can use the "main out" (L) to the input of your powered sub. Depending on the sub you will use, the UNBALANCED signal from the Yamaha may be able to use a ... If your amp doesn't have this, you will need an active sub that has high level signal pass through. Simply connect one of the channels to the ... Thanks for the input guys, and also images, much appreciated..! I already bought the sundown 10" woofer, and I've been really on the fence ... ... pass through query and input them into a temp table and then the record source of my report is the temp table. Is there anything else that I ... The input to a subwoofer loudspeaker is to pass through a passive low-pass Butterworth filter having a cutoff frequency of 100 Hz. Specify a ... In other words, you can connect the output of your mixer to the input of the subwoofer, and the output of the sub to the inputs on the speakers. It should have 0 or near 0v when the off-auto-on led is red and around 130v when green. If this is the case, your protection circuit is working ...