Revolutionize Video Conferencing Enhance Audiences with Subs Passthru

No, the amplifier and the speakers need to meet at the subwoofer. The speaker level inputs are a pass-through. ... sub amp. If you wanna run all the RCAs to the main amp, then use the passthrough to the sub, all you should need is the main RCA harness. I ... To get your sub max input signal, you want to send it both left and right out or use an aux. Try it. Just play some bass heavy music and run ... In this configuration, you probably have line-level input (RCA jacks) or an optical cable or HDMI digital input going into the subwoofer box. This will allow you to run 1 long XLR cable from your processor's “SUBWOOFER” output jack to the 1st subwoofer's XLR input, and an additional ... Most subwoofers have one of two types of inputs, and by far the more common is line-level, for unbalanced (RCA) or balanced (XLR) interconnects. I'm setting up a run from a DS to a pair of JL Audio e-110 subs, which have RCA inputs ... pass through is up to PS Audio's ... Is it possible the high level inputs of a subwoofer actually consume some of the main power amp's power? There's no harm in doing this, the reason subwoofers have L & R inputs is so that if you have a stereo pre-amplifier, you can use both “pre-outs ... If you want you can also have a shop fabricate you a custom box and make the bass enter the cabin through the top rear deck. UA_civ_eng 01:33 PM 09-14-2015.