Immerse Yourself in Audio Immersion Subs Passthru for Dynamic Bass Response

It has dual inputs in case you have a receiver with dual outputs that are actually in stereo. In that event you'd miss whatever was being sent ... If your amp doesn't have this, you will need an active sub that has high level signal pass through. Simply connect one of the channels to the ... It depends on the amp and how it was designed. Some (not all) of the amps that we use in our subs actually use the Right side input as the ... It should have 0 or near 0v when the off-auto-on led is red and around 130v when green. If this is the case, your protection circuit is working ... ... subs have a quarter input/output. i have many quarter speaker cables around. would that fix the problem, or is this something to do with the ... If you want you can also have a shop fabricate you a custom box and make the bass enter the cabin through the top rear deck. UA_civ_eng 01:33 PM 09-14-2015. Method 3 - Via RCA Pass Through · Connect one end of the RCA cable to the line input of your active speakers or amplifier. · Connect the other end ... Example to stream copy all of the video and audio streams, convert the all text based subtitle input streams (SRT, ASS, VTT, etc) to the ... ... subs have what they call "high-pass" thru built in. Using this ... My sub appears to have only 1 input(not counting the 1/4"), and 1 ... You can use the "main out" (L) to the input of your powered sub. Depending on the sub you will use, the UNBALANCED signal from the Yamaha may be able to use a ...