Master Network Connectivity A Step-by-Step Guide to MikroTik WAN Passthru

I have two WAN connections. One is fibre provided by PPPoE (ether1), the other DHCP (ether7) from a Mikrotik LTE dish configured for passthrough ... When a device is configured in passthrough mode, it will be assigned a WAN IP instead of a LAN IP. Other devices connected to your gateway may ... Place the WAN address you want for the phones on a bridge or switch that contains a) the port that the ISP is coming in on b) the logical "WAN" ... again. LTE inteface can be passthrough to other ethernet port of other ETHERNET device. Of course you can do a "bridge-wan with sfp+ and ... Comments17 · How to distribute your Public Ip's Internally. · MikroTik Tutorial 28 - Port Forwarding · Full MikroTik MTCNA - PPP & PPPoE · Full ... The DHCP packets will pass through the bridge like any other packet. ... The "ether1" vs "WAN port" seems to have been the point of confusion for ... Re: LTE Pass-through on LHGG-LTE6 ... Set LTE passthrough to the WAN port, and assign a separate static IP to the modem's LAN interface for ... The goal is basically to passthrough one of the 2 WAN connections and when preferred connection (dynamic DHCP) goes down switch to the secondary ... Port Forwarding Step by Step using Mikrotik RouterOS Learn how to easily provide access to internal resources using private IP addresses by ... I have a similar port forwarding rule to a PC "inside" MikroTik LAN which is working · Routing between sub-nets on different routers are fine: I ...