Unleashing Network Potential MikroTik WAN Passthru for Enhanced Performance

... WAN connection gets no traffic. The 2 WANs are RAIN 5G and Telkom LTE; Rain 5G is on Ether 1 and has IP Passthrough enabled so i get a 10. Ideally the WAN would come in to the HAP AC at port 1, this would somehow be passed though to the CCR in building 2 where the WAN interface will ... Is there an easy way to turn the Mikrotik router into an AP/Bridge(if that's the right terminology) so my Asus router will be issued the WAN IP address? I bought hap ax2 router. I first turned it on without wan cable plugged in just to make some primary configuration. I am connecting to the ... With the peplink router I have 2 Celluar WAN's, 2 Wifi WANs, 2 Ethernet WANs. I use their special service to bond them together to get better upload speeds. Mám MikroTika, kterém jsou 2 WAN porty, každý od jiného ISP a na každém je veřejná IP. Veškerý provoz do internetu (0.0.0.0/0) routuji na WAN2(=eth2), přes WAN1 ... Easiest might be to create a second bridge and bundle all WAN ports to it (that would be ether1, 4 and 5 in your case). Move DHCP client from ... Comments17 · How to distribute your Public Ip's Internally. · MikroTik Tutorial 28 - Port Forwarding · Full MikroTik MTCNA - PPP & PPPoE · Full ... You can then disable HW offload and set use-ip-firewall=yes to enable firewalling (can be basic or complex set of rules, doesn't matter). If ... Re: SXT LTE IP Passthrough ... 100% your provider is giving you a private IP (NAT OR CGNAT). Same will be if you are not using Passthrough.