Unlock Network Flexibility Mikrotik WAN Passthrough for Seamless Connectivity

2. Allow LAN and WAN ports to access Mikrotik by IP. ... 1. In LTE APNs I set Passthrough and it works well - whatever I connect to ether1 get's ... Anybody using HA behind Mikrotik? How do you pass through the connection? Mind share your experience ... mikrotik to redirect to local ip. ... passthrough=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN4 new-connection-mark=WAN4_conn passthrough=yes add action=mark ... I can get each WAN interface to work independently when disabling the other WAN Interface. My goal is to have Bridge1 Traffic only route out ... I set up FTP server on my nas, I try to login from outside network through MikroTik firewall (forwarded port 21 to local ip of my nas). ... WAN connection gets no traffic. The 2 WANs are RAIN 5G and Telkom LTE; Rain 5G is on Ether 1 and has IP Passthrough enabled so i get a 10. With VirtualHere this is no longer required, the network itself becomes the cable transmitting USB signals (also known as USB over IP, USB/IP, USB over WiFi, ... Is there an easy way to turn the Mikrotik router into an AP/Bridge(if that's the right terminology) so my Asus router will be issued the WAN IP address? I have a similar port forwarding rule to a PC "inside" MikroTik LAN which is working · Routing between sub-nets on different routers are fine: I ... I need to create a slave Wifi Interface on the R3 router which (somehow) directly connect the the R1 network (192.168.1.0/24) and assign ip addresses with DHCP ...