Empowering Network Engineers with MikroTik Passthru WAN Port Expertise

I'm using a Mikrotik router as LTE modem. The internet connection is configured as IP passthrough on the VLAN2. Vlan3 (192.168.88.1/24) is the management VLAN. Ideally the WAN would come in to the HAP AC at port 1, this ... add comment="WAN Passthrough VLAN" interface=ether5-trunk-to-b1 name ... When passthrough enabled, the LHG ends up on the WAN side with no IP address and routers generally don't pass MAC layer traffic between the WAN and LAN side. By the method of Network Load Balancing, You can Combine two or more WAN Gateway in one and can utilize combined bandwidth from both WAN Links. In Mikrotik ... I was able to connect it to a single PC which gets the public LTE ip. I can also plug ethernet 2 to one of the WAN ports of my dual router ... ... ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes add chain=prerouting dst-address-type=!local in-interface ... ... WAN add comment=defconf name=LAN /interface lte apn add apn=free ... MikroTik /ip hotspot profile set [ find default=yes ] html ... /interface bridge port add bridge=bridge ingress-filtering=no interface=ether3. / ... passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0. add ... I have a similar port forwarding rule to a PC "inside" MikroTik LAN which is working · Routing between sub-nets on different routers are fine: I ... accounting-port=YYYY secret=yourSecret service=wireless timeout=1500ms ... venue-names=IronWiFi:eng wan-downlink=50 wan-uplink=50 wan-status=up 3gpp ...