Unlocking the Full Potential of MikroTik Passthru WAN Port for Unparalleled Connectivity

By the method of Network Load Balancing, You can Combine two or more WAN Gateway in one and can utilize combined bandwidth from both WAN Links. In Mikrotik ... ... port 1 - VerizonFIOS" name=WAN1 set [ find default-name=ether2 ] ... WAN" in-interface=WAN1 log-prefix="**** drop all from WAN ****" add ... Yes. If you want it to work from both WANs, then you can't have in-interface=eth_Wan2 in dstnat rule. If you don't want to have duplicate rules, ... In this network, MikroTik Router's ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 ... A straight-forward way would be to create a new bridge, move eth4 to it and add eth1 to it. Which would imediately invalidate all WAN IP setup. Log in to the MikroTik device using the WebFig web-based interface. Navigate to the "Interface" tab and click on the "WAN" interface. In the " ... ... port add bridge=bridge1 interface=ether3 add bridge ... 2 WAN 1 LAN PPPoE Configuration In Mikrotik | 2 WAN Load Balancing. That sounds like Telus's Bridge Mode, which gives one port a public IP, and keeps another for the router to NAT behind. Upvote ... passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 src-address=10.10.10.0/24 add action=mark-connection chain=prerouting ... Place the WAN address you want for the phones on a bridge or switch that contains a) the port that the ISP is coming in on b) the logical "WAN" ...